[SerializableAttribute]
public class LRRMCalibration<T> : QSOLTCalibration<T>,
ILRRMCalibration<T>, IQSOLTCalibration<T>, IOnePortCalibration<T>, IGenericCalibrationModel<T>,
ICalibration<T>, IBinary, IFlatVector<T>
where T : new(), Object, IRealNumber<T>
<SerializableAttribute>
Public Class LRRMCalibration(Of T As {New, Object, IRealNumber(Of T)})
Inherits QSOLTCalibration(Of T)
Implements ILRRMCalibration(Of T), IQSOLTCalibration(Of T),
IOnePortCalibration(Of T), IGenericCalibrationModel(Of T), ICalibration(Of T),
IBinary, IFlatVector(Of T)[SerializableAttribute]
generic<typename T>
where T : gcnew(), Object, IRealNumber<T>
public ref class LRRMCalibration : public QSOLTCalibration<T>,
ILRRMCalibration<T>, IQSOLTCalibration<T>, IOnePortCalibration<T>, IGenericCalibrationModel<T>,
ICalibration<T>, IBinary, IFlatVector<T>[<SerializableAttribute>]
type LRRMCalibration<'T when 'T : new() and Object and IRealNumber<'T>> =
class
inherit QSOLTCalibration<'T>
interface ILRRMCalibration<'T>
interface IQSOLTCalibration<'T>
interface IOnePortCalibration<'T>
interface IGenericCalibrationModel<'T>
interface ICalibration<'T>
interface IBinary
interface IFlatVector<'T>
end| LRRMCalibrationT | Initializes a new instance of the LRRMCalibrationT class |
| ErrorModel |
Error Model
(Inherited from GenericCalibrationModelT) |
| ErrorTerms |
Full leaky error terms.
Size : 2N-Ports,
Port 1, 2, ... N : Raw ports
Port N+1, N+2, ... 2N : Error corrected ports
(Inherited from GenericCalibrationModelT) |
| FlatVectorSize |
Get Flat Vector Size
(Inherited from GenericCalibrationModelT) |
| Frequency |
Frequency / Hz
(Inherited from GenericCalibrationModelT) |
| FrequencyConversions |
Frequency Conversions
(Inherited from GenericCalibrationModelT) |
| NFreq |
Number of frequency points
(Inherited from GenericCalibrationModelT) |
| NPorts |
Number of ports
(Inherited from GenericCalibrationModelT) |
| NReflection |
Number of reflection paths
(Inherited from GenericCalibrationModelT) |
| NTransmission |
Number of transmission paths
(Inherited from GenericCalibrationModelT) |
| NVnaPorts |
Number of VNA Ports
(Inherited from GenericCalibrationModelT) |
| OptionalStandards |
Optional Calibration Standards
(Overrides QSOLTCalibrationTOptionalStandards) |
| Ports |
Port assignment
(Inherited from GenericCalibrationModelT) |
| PortZr |
Error corrected Port Zr / Ohm
(Inherited from GenericCalibrationModelT) |
| PowerStandards |
Power Calibration Standards
(Overrides QSOLTCalibrationTPowerStandards) |
| RawPortZr |
Raw Port Zr / Ohm
(Inherited from GenericCalibrationModelT) |
| RequiredStandards |
Required Calibration Standards
(Overrides QSOLTCalibrationTRequiredStandards) |
| SwitchTerms |
Switch terms.
Size: N-Ports.
(Inherited from GenericCalibrationModelT) |
| BinarySetDataFrom(MyBinaryReader) |
Set object data from Binary Reader.
(Inherited from GenericCalibrationModelT) |
| BinarySetDataFrom(MyBinaryReader, String, Int32) |
Set object data from Binary Reader.
(Inherited from GenericCalibrationModelT) |
| BinaryWriteDataTo |
Write object data to Binary Writer.
(Inherited from GenericCalibrationModelT) |
| ComputeErrorTerms(CalConfigStdT) |
Compute Error Terms
(Inherited from GenericCalibrationModelT) |
| ComputeErrorTerms(CalConfigStdT, BackgroundWorker, DoWorkEventArgs) |
Compute Error Terms
(Overrides QSOLTCalibrationTComputeErrorTerms(CalConfigStdT, BackgroundWorker, DoWorkEventArgs)) |
| CopyCalibration(Int32, Int32, SParamDataT, SParamDataT, SParamDataT) |
QSOLT Transmission Calibration.
(Inherited from QSOLTCalibrationT) |
| CopyCalibration(Int32, Int32, SParamDataT, SParamDataT, SParamDataT, SParamDataT, SParamDataT) |
QSOLT Transmission Calibration.
(Inherited from QSOLTCalibrationT) |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) |
| ErrorCorrection(SParamDataT) |
Correction of the raw DUT measurement with the VNA Error Terms and Switch Terms.
(Inherited from GenericCalibrationModelT) |
| ErrorCorrection(WaveParamDataT) |
Correction of the raw DUT measurement with the VNA Error Terms and Switch Terms.
(Inherited from GenericCalibrationModelT) |
| ErrorCorrection(SParamDataT, UncContributionsT) |
Correction of the raw DUT measurement with the VNA Error Terms and Switch Terms.
(Inherited from GenericCalibrationModelT) |
| ErrorCorrection(WaveParamDataT, UncContributionsT) |
Correction of the raw DUT measurement with the VNA Error Terms and Switch Terms.
(Inherited from GenericCalibrationModelT) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) |
| FlatVectorSetDataFrom |
Set object data from Flat Vector
(Inherited from GenericCalibrationModelT) |
| FlatVectorWriteDataTo |
Write object data to Flat Vector
(Inherited from GenericCalibrationModelT) |
| GenerateRawData |
Generate raw data from error corrected data of a DUT
(Inherited from GenericCalibrationModelT) |
| GetHashCode | Serves as the default hash function. (Inherited from Object) |
| GetObjectData |
Custom Serialization
(Inherited from GenericCalibrationModelT) |
| GetType | Gets the Type of the current instance. (Inherited from Object) |
| Init(Int32, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Double, ComplexT, ComplexT) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Double, Int32, ComplexT) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Int32, VnaPortDescription, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Int32, Int32, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Double, ComplexT, ComplexT, VnaPortDescription, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Double, ComplexT, ComplexT, Int32, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| Init(Double, ComplexT, ComplexT, VnaPortDescription, FrequencyConversion, Int32) |
Initialize a n-port calibration.
(Inherited from GenericCalibrationModelT) |
| LRRM_Calibration | LRRM Calibration |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
| ReceiverCalibrationMultiplePorts |
Receiver Calibration (multiple Ports)
(Inherited from GenericCalibrationModelT) |
| ReceiverCalibrationSinglePort |
Receiver Calibration (single port)
(Inherited from GenericCalibrationModelT) |
| ReflectionCalibration |
SOLT Reflection Calibration.
(Inherited from OnePortCalibrationT) |
| ScaleErrorTermsAllPorts |
Scale Error Terms (all ports)
(Inherited from GenericCalibrationModelT) |
| ScaleErrorTermsSinglePort |
Scale Error Terms (single port)
(Inherited from GenericCalibrationModelT) |
| SwitchedErrorTerms |
Compute Error Terms for source switched to one port.
(Inherited from GenericCalibrationModelT) |
| ToString | Returns a string that represents the current object. (Inherited from Object) |