public interface IVna2 : IVna, ITriggerSingleContHoldDevice,
ITriggerSingleDevice, IDevice
Public Interface IVna2
Inherits IVna, ITriggerSingleContHoldDevice, ITriggerSingleDevice, IDevice
public interface class IVna2 : IVna,
ITriggerSingleContHoldDevice, ITriggerSingleDevice, IDevice
type IVna2 =
interface
interface IVna
interface ITriggerSingleContHoldDevice
interface ITriggerSingleDevice
interface IDevice
end
DwellTime |
Dwell Time / s
(Inherited from IVna) |
FrequencyCenter |
Center Frequency / Hz
(Inherited from IVna) |
FrequencyConversions | Frequency Conversions |
FrequencyConversionSettings | Frequency Conversion Settings |
FrequencyConversionState | Turns frequency conversion ON or OFF. |
FrequencyCW |
CW Frequency / Hz
(Inherited from IVna) |
FrequencyList |
Frequency List / Hz
(Inherited from IVna) |
FrequencySpan |
Frequency Span/ Hz
(Inherited from IVna) |
FrequencyStart |
Start Frequency / Hz
(Inherited from IVna) |
FrequencyStop |
Stop Frequency / Hz
(Inherited from IVna) |
Identification |
Instrument Identification
(Inherited from IDevice) |
IFAverageFactor |
IF Average Factor
(Inherited from IVna) |
IFAverageMode |
IF Average Mode
(Inherited from IVna) |
IFBandwidth |
IF Bandwidth / Hz
(Inherited from IVna) |
NTestPorts |
Number of Test Ports
(Inherited from IVna) |
OutputState |
Turns RF power from the source ON or OFF.
(Inherited from IVna) |
ParameterMatrix |
VNA parameter matrix
(Inherited from IVna) |
Parameters |
List with available parameters
(Inherited from IVna) |
Port1Attenuator |
Port 1 Attenuator / dB
(Inherited from IVna) |
Port1Extension |
Port 1 extension / s
(Inherited from IVna) |
Port2Attenuator |
Port 2 Attenuator / dB
(Inherited from IVna) |
Port2Extension |
Port 2 extension / s
(Inherited from IVna) |
RootPath |
Root Path
(Inherited from IVna) |
SegmentTable |
SegmentTable
1. Column : Start Frequency / Hz
2. Column : Stop Frequency / Hz
3. Column : Frequency Step / Hz
4. Column : IF Bandwidth / Hz
(Inherited from IVna) |
Settings |
Settings
(Inherited from IVna) |
SetUpMode |
VNA Set up mode
(Inherited from IVna) |
Source1Power |
Source 1 Power / dBm
(Inherited from IVna) |
Source1PowerSlope |
Source 1 Power Slope / (dB/GHz)
(Inherited from IVna) |
Source2Power |
Source 2 Power / dBm
(Inherited from IVna) |
Source2PowerSlope |
Source 2 Power Slope / (dB/GHz)
(Inherited from IVna) |
SourcePorts |
Source Port Settings
(Inherited from IVna) |
SupportsFrequencyConversion | Supports Frequency Conversion |
SweepMode |
Sweep Mode
(Inherited from IVna) |
SweepPoints |
Sweep Points
(Inherited from IVna) |
SweepTime |
Sweep Time / s
(Inherited from IVna) |
Z0 |
Z0 / Ohm
(Inherited from IVna) |
Close |
Closes the specified device session.
(Inherited from IDevice) |
GetData |
Get data from VNA. All available parameters.
(Inherited from IVna) |
GetState |
Get instrument state from VNA.
(Inherited from IVna) |
GetState(String) |
Get instrument state from VNA.
(Inherited from IVna) |
Measure |
Triggers VNA, waits for sweep complete, gets and saves raw data.
(Inherited from IVna) |
Open |
Opens a Device session to the specified resource.
(Inherited from IDevice) |
Preset |
Presets the device.
(Inherited from IDevice) |
SetSingleFrequency(Double) |
Set single frequency.
(Inherited from IVna) |
SetSingleFrequency(Double, Int32) |
Set single frequency.
(Inherited from IVna) |
SetState(Byte) |
Set instrument state to VNA.
(Inherited from IVna) |
SetState(String) |
Set instrument state to VNA.
(Inherited from IVna) |
SetUp(String) |
Set up VNA.
(Inherited from IVna) |
SetUp(VnaSetUpMode) |
Set up VNA.
(Inherited from IVna) |
TriggerCont |
Trigger continuous.
(Inherited from ITriggerSingleContHoldDevice) |
TriggerHold |
Trigger hold.
(Inherited from ITriggerSingleContHoldDevice) |
TriggerSingle |
Trigger device and waits for measurement complete.
(Inherited from ITriggerSingleDevice) |
TriggerSingleStart |
Triggers device.
(Inherited from ITriggerSingleDevice) |
TriggerSingleWait |
Waits for measurement complete.
(Inherited from ITriggerSingleDevice) |